Panoramic Power (Centrica) PAN-14-US or PAN-14-EU Wireless Electric Meter
$175.00
The Panoramic Power PAN-14 Wireless Electric Sensor is appropriate for granular monitoring of individual circuits and devices. This sensor can measure amperage on 1-Phase, 2-Phase, or 3-Phase circuits. The PowerRadar front end that this sensor integrates into will provide the user with the ability to configure the specific metered circuit's load type and phasing properties.
• High current sensor attaches to any size standard 0–5 A current transformer
• Allows measurements at any current range or wire gauge
• Wireless sensor and CT are closed around the hot wire with no additional wiring
• Plus all the benefits of the PAN-10 and PAN-12 models
The Panoramic Power System monitors electrical energy consumption at individual circuit level and detects excess usage allowing organizations to identify and reduce energy and maintenance expenses.
The Panoramic Power System consists of wireless, self-powered sensors engineered to allow for rapid, non-invasive installation, with almost no disturbance to operations. Sensors are easily attached to circuit breakers by just snapping them on to the outgoing electrical wire. They monitor the flow of electricity through the resulting magnetic field and also use the field as a power source. The sensors do not require any maintenance. Data collected by the sensors is sent to a bridge, which, in turn, transfers the information to the Panoramic Power System server through the Internet, using Cloud technology.
The PAN-14 amperage sensor is designed to work with an external 0-5 Amp Secondary Current Transformer. Emergent Metering offers a variety of Current Transformers that are sized for the metered circuit. These products include:
The specific CT ratio will be programed in the PowerRadar frontend where the user can configure the estimated power factor, voltage and amperage sensor ratio.
This sensor offers the following benefits:
• Allows measurements at any current range or wire gauge
• Wireless sensor and CT are closed around the hot wire with no additional wiring
• Plus all the benefits of the PAN-10 and PAN-12 models
Choose Quantity
Product Details
Specifications
Key features • Connects to any standard 5 A current transformer • No maintenance; self-powered • High accuracy • Wireless sensor and CT are closed around the hot wire with no additional wiring • Real-time current data transmitted every 10 seconds
Certification
USA and Canada
Safety: UL 61010-1, UL 61010-2-030, CAN/CSA-C22.2 No. 61010-1 (ETL listed) EMC: FCC Part 15 subpart B, ICES-003 Radio: FCC Part 15 subpart C, RSS-210, RSS-Gen
Europe
Safety: EN 61010-1, EN 61010-2-030 (CE) EMC: EN ETSI 301 489-1, 301 489-3, 613 326-1 Radio: EN ETSI 300 220-1, 300 220-2
Australia
ACMA compliant
Russia EAC compliant
Japan
Radio: ARIB STD-T108
CB Certification IEC 61010-1, IEC 61010-2-030 by Intertek Testing Services
Wireless sensor
- Current measurement rangeDetermined by external current transformer
- Current input range0 – 5 A (up to 10 A peak) (from external current transformer)
- Minimum operating current0.03 – 0.05 A (at input from external CT)
- AC frequency supported50 Hz (EU, JPE versions) 60 Hz (US, JPW versions)
- Transmission frequency434 MHz (EU version) 915 MHz (US version) 923 MHz (JPE, JPW versions)
- Transmission power (ERP)0 dBm (max – EU, US versions) -4 dBm (max – JPE, JPW versions)
- Transmission interval10 seconds
- Flammability rating of external enclosureUL94 V-0
- Ingress protection (IP) ratingIP5X
- Operating temperature-25 – 60°C / -13 – 140°F
- Operating humidity range5% – 95% non-condensing
- Storage temperature-25 – 65°C / -13 – 149°F