Electric Submeters & Current Sensors
Circuit-level electric monitoring is the foundation of any energy management program. Emergent Metering offers the full Panoramic Power wireless sensor lineup — from the PAN-10 for branch circuits up to 63A, to the PAN-42 revenue-grade power meter for main service and large equipment monitoring. Every sensor installs non-invasively with zero downtime: snap it on the wire, and data flows to the PowerRadar cloud within seconds.
Our electric submetering solutions support IECC 2021 end-use monitoring requirements for HVAC, lighting, and plug loads, as well as ASHRAE 90.1 whole-building energy tracking. For tenant submetering, the wireless architecture eliminates the conduit runs and panel modifications that make traditional CT-based meters expensive to install.
The Gen 4+ Bridge serves as the data gateway, forwarding sensor data to the cloud via LAN, WiFi, or 4G LTE. Local Modbus TCP export enables direct integration with BMS, SCADA, and third-party analytics. Current transformers from 100A to 4000A extend the PAN-14 and PAN-42 to any service size.
Panoramic Power PAN-10 Wireless Electric Sensor
$175.00
View Details →
Panoramic Power PAN-12 Wireless Electric Sensor
$175.00
View Details →
Panoramic Power PAN-14 High-Current Wireless Sensor
$175.00
View Details →
Panoramic Power PAN-42 Revenue-Grade Power Meter
$389.00
View Details →
Panoramic Power Gen 4+ Bridge — LAN / WiFi / 4G LTE
$390.00
View Details →PAN-2-H-USV4+-ENC
Centrica / Panoramic Power (assembled by Emergent Metering)
Panoramic Power Bridge — Pre-Installed ABS Enclosure
$570.00
View Details →
AHU Metering Package — PAN-42, Cellular Bridge & CTs
Starting at $1,300.00
View Details →CT-SERIES
Various
Current Transformers (CTs) — 100A to 4000A
$40.00
View Details →Leviton / Obvius
S7100 BCM 48 Inputs With Display
S7100 BCM 48 Inputs With Display
48-input branch circuit monitor with integrated display for panelboard-level energy monitoring. Ideal for tenant submetering and IECC 2021 end-use compliance.
S7100 BCM 24 Inputs With Display
24-input branch circuit monitor with display for mid-size panelboard energy monitoring and tenant submetering applications.
S7100 BCM 12 Inputs With Display
12-input branch circuit monitor with display for small panelboard monitoring. Cost-effective solution for targeted circuit-level energy visibility.
S7100 3-Phase Meter Wall Mount
Wall-mounted 3-phase revenue-grade meter for whole-building or large-load energy measurement with Modbus output.
100A Current Transformer (CT)
100A split-core current transformer with 0–5A secondary output. Compatible with PAN-14, PAN-42, and other 0–5A input meters.
600A Current Transformer (CT)
600A split-core current transformer with 0–5A secondary output for medium distribution panel and feeder monitoring.
1000A Current Transformer (CT)
1000A split-core current transformer for large feeder and main service monitoring with 0–5A secondary output.
2000A Current Transformer (CT)
2000A split-core current transformer for main service entrance and switchgear monitoring with 0–5A secondary output.
4000A Current Transformer (CT)
4000A current transformer for the largest service entrances and utility-grade metering applications.
Fluke 1773 Power Quality Analyzer
Three-phase power quality analyzer for electrical system diagnostics, harmonic analysis, and power quality troubleshooting.
Fluke 1775 Power Quality Analyzer
Advanced three-phase power quality analyzer with touchscreen interface and comprehensive power quality measurement capabilities.
Fluke 1777 Power Quality Analyzer
Premium three-phase power quality analyzer with full waveform capture, transient detection, and energy loss analysis.
Need Help Selecting the Right Meter?
Our metering specialists can help you find the perfect solution for your application.